Make your own cookie cutters

 

 

 

 

cookie cutter 3 display

 

 

 

Do you want a way to customize your cookies ? Then make your own cookie cutters ! With a few easy steps, you can make your own cookie cutters in creative shapes that you can personalize for any occasion.

 

Make your own  Cookie Cutters

 

 

 

 

 

 

Things you will need:

 

  • Gloves 
  • Disposable Aluminum Pans
  • Heavy Duty Scissors
  • Ruler Glue Or Tape

 

 

Safety gloves

 

Disposable Aluminum Pans

 

 

Heavy duty Scissors

 

 

Ruler

 

 

 

 

52028434d826

Using safety gloves,with you’re heavy duty scissors; cut the sides off the pan.

 

 

 

550f7cd8eed2

When closing your cookie cutter, over lap the ends of the strips, and using staple or glue to seal it together more then once.

 

c8064426b220

I made a oval shape. But, you can use pens or cups to help curves.

 

1.Using a disposable Aluminum Pans draw straight lines onto the bottom the pan, marking lengthwise. Use a ruler or something with a straight edge. Mark the lines at least 1″ apart and use the bottom of the surface as much as possible.

2. Using safety gloves,with you’re heavy duty scissors; cut the sides off the pan. Next , cut out the strips that were drawn on the bottom of the pan. {Be very careful while cutting}

 

3.Design: Figure out what kind of shape or design that you want. Draw the shape of cookie cutter that you would like to create on a sheet of paper. Or a picture, and cut out the shape. The perimeter of your cookie cutter can be no longer than your longest strip. For a guideline, cut a piece of string the length of your strips and use it to measure around the perimeter of your design. Using the string, hold it up to the strips, to measure it to see if it is long enough. Allow 1″- 2″ of the strip, so you have enough material for curves and to close cutters when you’ve finished shaping them.

 

4.Take one of the 1″ strips and start shaping and molding it around the design. Helpful tips:

 

                      Use pens or cups to help curves.

 

                      Use a ruler to create different angles.

 

 

 

5.When closing your cookie cutter, over lap the ends of the strips, and using staple or glue to seal it together more then once.

 

 

6.You will have nicks, so you need to file it down with a metal file. Fold over the edges { about 1/8 inch/3.1} This will provide a surface that will not be sharp so you don’t cut yourself . Please, make sure you wash and dry thoroughly, before using.

 

 

 

Adapted from:

http://www.wikihow.com › … › Crafts › Metalwork and Wire Projects

http://www.instructables.com/id/make-your-own-cookie-cutters

 

 

 

Enhanced by Zemanta
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s